News

  • 0
  • 0

Global Ti6Al4V Powder market trend 2022-2026 What is TC4 (Ti6Al4V) Titanium Alloy Material by Newsbpovoice

Koalas were declared endangered in eastern Australia on Friday, with more and more koalas dying from disease, habitat loss, and other threats. Earlier, the koala was considered a vulnerable species, and the Commonwealth Department of the Environment changed its protection level to endangered on the east coast of Queensland, New South Wales, and the Australian Capital Territory. Many koalas in Australia are infected with chlamydia. The disease can cause blindness, infection, and infertility. Last year, the Australian Koala Foundation said Australia had lost about 30 percent of its koala population in the past three years. Without immediate action, the species could become extinct by 2050.
Unlike koalas, which are on the brink of extinction, the market demand for Ti6Al4V Powder will grow substantially.

What is TC4(Ti6Al4V)?

TC4(Ti6Al4V) alloy is a medium strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V. This alloy has excellent comprehensive properties and has obtained the most extensive applications in the aviation and aerospace industries. The long-term working temperature of the alloy can reach 400 ℃. In the aviation industry, it is mainly used to manufacture the fan and compressor disks and blades of the engine, as well as the important load-bearing components such as beams, joints and bulkheads in the aircraft structure.


The main semi-finished products of TC4 titanium alloy are bars, forgings, thick plates, thin plates, profiles and wires, etc. The alloy is mainly used in the annealed state, and can also be strengthened by solution aging treatment, but the hardened cross section is generally not more than 25mm.


The alloy has good process plasticity and superplasticity, and is suitable for various pressure forming. The alloy can also be welded and machined in various ways.


TC4(Ti6Al4V) heat treatment system

1. Annealing

Plate: 700-850℃, 0.5-2h, air cooling; bar and forging: 700-800℃, 1-2h, air cooling.

2. Vacuum annealing

700-800°C, 0.5-2h, the furnace is cooled to below 200°C to allow air cooling. The absolute pressure in the furnace should be no more than 0.09Pa.

3. Solution treatment

910-940℃, 0.5-2h, water quenching.

4. Aging

520-550°C, 2-4h, air cooling.

5. Stress relief annealing

Complete stress relief annealing: 600-650℃, 1-4h, air cooling; incomplete stress relief annealing: 500-600℃, 0.5-3h, air cooling. Stress relief annealing can be carried out in an air furnace or a vacuum furnace.


About KMPASS

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Ti6Al4V powder, please send an email to: sales2@nanotrun.com


3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Our company is a strong company that provides excellent 3D printing Ti6Al4V Powder. If you need 3D printing and Ti6Al4V Powder, please feel free to contact us.

Inquery us

Our Latest News

Global early strength agent market trend 2023-2029 Study On Early Strength Effect of Lithium Carbonate On Mortar by Newsbpovoice

Mortar early strength agent is an important mortar additive, which has an important influence on the performance of mortar. it can improve construction efficiency and save construction cost.…

Global MoS2 powder market trend 2023-2028 Lubrication of Molybdenum Disulfide MoS2 by Newsbpovoice

Molybdenum disulfide is a solid powder made from natural molybdenum concentrate powder, which is the modern…